Filter
Top Products
6–20 Reference Guide
Troubleshooting
If the Notebook Will Not Boot from the Diskette
Drive
■ Make sure the diskette drive is selected as the boot device.
See the “Basic Operation” chapter in this guide for directions.
■ If you are using a USB diskette drive, use the BIOS Setup
utility to make sure Legacy USB Support is enabled. If your
notebook also has a built-in diskette drive, use the BIOS
Setup utility Boot menu to make sure the USB diskette drive
is the first device under Removable Drive.
If the Notebook Stops Responding After Booting
Check whether you are connected to a TCP/IP network with
no DHCP server. This can cause a long delay at startup because
DHCP is enabled. Contact your network administrator to
determine the proper TCP/IP configuration.
If the Notebook Takes a Long Time to Resume After
Entering Standby
The notebook can routinely take a minute or more to resume if
it has a network card installed. While the operating system is
loading drivers and checking hardware and network connections,
you will see a blinking cursor on your display. As soon as the
hardware has been reinitialized, the Windows desktop will
appear.
319954-001.book Page 20 Thursday, February 3, 2005 3:03 PM