Filter
Top Products
5–14 Reference Guide
Add-On Devices
7. Pull the board out of the connector.
8. Replace the cover.
9. Insert the battery pack.
Replacing the Hard Drive
To Replace the Hard Drive
You will need a small Phillips screwdriver for this procedure.
1. Save your work and shut down the notebook. If you are not
sure whether the notebook is off or in Hibernation, briefly
press the power button. If your work returns to the screen,
save your work, exit all applications, and then shut down the
notebook.
2. Disconnect all external devices connected to the notebook.
3. Disconnect the power cord
4. Remove the battery pack.
5. Turn the unit bottom-side up.
319954-001.book Page 14 Thursday, February 3, 2005 3:03 PM