Filter
Top Products
5-20 Removal and Replacement Procedures - Desktop
5.12 Expansion Board Guide
To remove the expansion board guide, complete the following steps:
1. Remove the system unit cover (Section 5.6).
2. Remove all outboard expansion boards that may interfere with this operation (Section 5.8).
3. Push down on the plastic clip 1 on the top of the board guide 2 to release it; then pivot the guide
down 2 and pull it out.
Figure 5-18.
Removing the Expansion Board Guide
To replace the expansion board guide, reverse the above procedure. The board guides in the spares kit
are keyed for proper installation.