Filter
Top Products
Compaq Deskpro 2000 Series of Personal Computers 6-41
6. Connect the drive cables. Refer to Section 6.19.1 for a diskette drive and Section 6.19.2 for a CD-
ROM drive.
Figure 6-42.
Connecting the Power
1
and the Signal
2
Cables to a Hard Drive
7. Remove the bezel blank from the front bezel if necessary (Section 6.16.3).
8. Install the front bezel (Section 6.16.1).
9. Install the access panel (Section 6.6.1).
10. The system will automatically recognize a hard drive sold by Compaq and will automatically
reconfigure the computer. If you have installed a third-party hard drive, you will need to run
Computer Setup to reconfigure the computer. Refer to Chapter 2, “Compaq Utilities,” for
information on running Computer Setup.