Filter
Top Products
32 Cards
3
If you are installing a new card, remove the filler bracket covering the
empty card slot. To remove a filler bracket, gently insert a scribe under the
top edge of the bracket.
4
If you are replacing a card that is already installed in the computer, remove
the card. If necessary, disconnect any cables connected to the card.
• For a PCI card, grasp the card by its top corners, and ease it out of its
connector.
• For a PCI Express card, pull the securing tab, grasp the card by its top
corners, and ease it out of its connector.
5
If your card includes a card retention bar, remove the bar. Gently pull the
securing tab, grasp the card by its top corners, and ease it out of its
connector.
6
Prepare the new card for installation.
1 alignment guide 2 card
3 card-edge connector 4 card connector
5 card slots (4) 6 release lever
7 card retention latch
1
2
3
4
6
7
5