Filter
Top Products
26 Storage Array
Sender e-mail settings include the SMTP and e-mail address information MD
Storage Manager uses to send e-mail alerts. To configure sender e-mail
settings:
1
Click the
Tools
tab, then click
Set Up Email Alerts
.
2
Enter the following information:
•
Sender email address
— The e-mail address that appears as the sender
on every e-mail alert, such as that of the network administrator.
•
Mail (SMTP) server
— The name of the Simple Mail Transfer
Protocol (SMTP) gateway of the mail server from which e-mail alerts
will be sent. For example,
smtp.mycompany.com
.
•
Edit Sender Contact Information (Optional)
— Additional
information about the sender such as the sender’s name, company,
and phone number. This information is optional; e-mail alerts will
work if contact information is not provided.
To specify to whom alerts are sent:
1
Click the
Tools
tab, then click
Set Up Email Alerts
.
2
Type an e-mail address in the
Recipient email addresses
text box and click
Add
to add it to the list of configured e-mail addresses.
3
Specify the following for each e-mail address in the list (to choose a
different setting, click the down arrow to the right of the field):
Information To Send
— Select one of the following options from the
drop-down list:
•
Event Only
— The alert e-mail contains only the event
information. This alert type is the default.
•
Event + Profile
— The alert e-mail contains the event
information and the storage array profile.
•
Event + Support
— The alert e-mail contains the event
information and a compressed file that contains complete support
information for the storage array that has generated the alert.
Frequency
— Select one of the following options from the drop-down list:
•
Every event
— Sends an e-mail whenever an event occurs. This
option is the default.