Filter
Top Products
98 Firmware Downloads
3
Click
Select File
to browse to the file that you want to download. By
default, only firmware images that are compatible with the current storage
array configuration appear.
4
Click the
non-redundant-MSCS NVSRAM
file in the
File Selection
area
and then click
OK
.
5
If the file you selected is not valid or is incompatible with the current
storage array configuration, an error message appears. Click
OK
to close it,
and select a compatible file.
6
Click
Transfer...
7
A
Confirm Download
dialog box appears listing the current versions and
the versions you selected of the RAID controller and NVSRAM firmware.
To complete the download, click
Yes
.
Downloading Physical Disk Firmware
Use the following procedure to download physical disk firmware:
NOTE: Dell recommends stopping all I/O to the array when downloading physical
disk firmware.
NOTE: Due to a limitation with Linux, physical disk firmware updates must be
performed using out-of-band management only. Failure to do so may result in the
host server becoming unresponsive, and it may require a reboot.
1
Click the
Support
tab, then click
Download firmware
.
2
From the
Download firmware
display, click
Download Physical Disk
Firmware
.
A dialog box lists the current physical disk firmware version in use.
3
Click
Add
to browse to the file that you want to download. By default, only
firmware images that are compatible with physical disks in the storage
array appear.
4
Click the file in the
File Selection
area and then click
OK
.
5
If the file you selected is not valid or is incompatible with the physical
disks in the storage array, an error message appears. Click
OK
to close it,
and select a compatible file.
6
Click
Transfer...