Filter
Top Products
Troubleshooting 111
Previous Configuration of Disks Removed Error Message
Error Message: All of the disks from your previous
configuration are gone. If this is an unexpected
message, then please power off your system and check
your cables to ensure all disks are present. Press any
key to continue, or 'C' to load the configuration
utility.
Probable Cause: The message indicates that all configured disks were
removed. If the disks were not removed, they are no longer accessible. The
SAS cables for your system might be improperly connected.
Corrective Action: Check the cable connections and fix any issues. Restart
the system. If there are no cable problems, press any key or <C> to continue.
Missing Virtual Disks Error Message
Error Message: The following virtual disks are missing:
(x). If you proceed (or load the configuration
utility), these virtual disks will be removed from
your configuration. If you wish to use them at a later
time, they will have to be imported. If you believe
these virtual disks should be present, please power
off your system and check your cables to ensure all
disks are present. Press any key to continue, or 'C'
to load the configuration utility.
Probable Cause: The message indicates that some configured disks were
removed. If the disks were not removed, they are no longer accessible. The
SAS cables for your system might be improperly connected.
Corrective Action: Check the cable connections and fix any issues. Restart
the system. If there are no cable problems, press any key or <C> to continue.