Filter
Top Products
2 Emphasis User Interface 25
Set levels using [Full]:
Step 1: Select channels using the procedure described in Select Channels, Dimmers
and Fixtures, page 23.
Step 2: Press [Full] to set the channel(s) to 100%.
Set levels using the level wheel (Expression/Insight only):
Step 1: Select channels using the procedure described in Select Channels, Dimmers
and Fixtures, page 23.
Step 2: Roll the level wheel away from you to raise the level, or toward you to lower the
level.
Set levels using the trackpad (Express only)
Step 1: Select channels using the procedure described in Select Channels, Dimmers
and Fixtures, page 23.
Step 2: Slide your finger from bottom to top of the trackpad to raise the level, or from top
to bottom to lower the level. You can change the resolution of the trackpad by
pressing the coarse and fine pads to the left of the main trackpad. The coarse
pad has a rougher texture than the fine pad. When you set the resolution to
coarse, levels change faster when you slide your finger up and down. Use the
fine setting to move levels only a few points at a time.
Coarse pad
Fine pad
X - Axis (Pan)
Y - Axis
(Tilt)