Filter
Top Products
462 Configuring Switching Information
Figure 7-125. DHCP Relay Global Configuration
If you enable or disable the DHCP Relay feature, click Apply Changes to submit the changes to system.
Configuring DHCP Relay With CLI Commands
For information about the CLI commands that perform this function, refer to the following chapter in
the
CLI Reference Guide
:
• L2 DHCP Relay Agent Commands
The following table summarizes the equivalent CLI commands for this feature.
DHCP Relay Interface Configuration
Use this page to enable L2 DHCP relay on individual ports.
NOTE: L2 DHCP relay must also be enabled globally on the switch.
To access this page, click Switching
→
DHCP Relay
→
Interface Configuration in the tree view.
Table 7-72. DHCP Relay Global Commands
CLI Command Description
dhcp l2relay Enables the Layer 2 DHCP Relay agent for an interface.