Filter
Top Products
720 Configuring IP Multicast
Multicast Route Table
Use the Multicast Route Table page is used to display MRoute data.
To display the page, click IPv4 Multicast
→
Multicast
→
Multicast Route Table or IPv6 Multicast
→
Multicast
→
Multicast Route Table.
Figure 12-3. Multicast Route Table
The Multicast Route Table page contains the following fields:
•
Group IP
— The destination group IP address.
•
Source IP
— The IP address of the multicast packet source that, combined with the Group IP,
identifies an multicast route table entry.
•
Incoming Interface
— The incoming interface on which multicast packets for this source/group arrive.
Table 12-2. Multicast Interface Configuration Commands
CLI Command Description
ip multicast ttl-threshold Applies a
ttlvalue
to a routing interface.
show ip mcast interface Displays the multicast information for the specified interface.