Filter
Top Products
Configuring IPv6 661
•
IntlfID
— The Interface ID that the neighbor advertises in its Hello packets on this link.
•
Interface
— The slot/port that identifies the neighbor interface index.
•
State
— State of the relationship with this neighbor.
•
Dead Time
— Number of seconds since last Hello was received from adjacent neighbors. Set this value
to 0 for neighbors in a state less than or equal to Init.
Displaying the OSPFv3 Neighbor Table
1.
Open the
OSPFv3 Neighbor Table
page.
2.
Select the interface to display from the
Interface
drop-down menu.
The OSPF neighbor table for the selected interface displays.
Displaying the OSPFv3 Neighbor Table Using CLI Commands
For information about the CLI commands that perform this function, see the following chapter in the
CLI Reference Guide
:
• OSPFv3 Commands
The following table summarizes the equivalent CLI commands for this feature.
OSPFv3 Link State Database
Use the OSPFv3 Link State Database
page to display the link state and external LSA databases. The
OSPFv3 Link State Database
page has been updated to display external LSDB table information in
addition to OSPFv3 link state information.
To display the page, click IPv6
→
OSPFv3
→
Link State Database in the tree view.
Table 10-20. OSPFv3 Neighbor Table Commands
CLI Command Description
show ipv6 ospf neighbor Displays information about OSPF neighbors.