Filter
Top Products
614 Configuring IPv6
Interface Configuration
Use the Interface Configuration
page to configure IPv6 interface parameters. This page has been
updated to include the IPv6 Destination Unreachables field.
To display the page, click IPv6
→
Interface Configuration in the tree view.
Figure 10-2. IPv6 Interface Configuration
The IPv6 Interface Configuration page contains the following fields:
•
Interface
— Selects the interface to be configured. When the selection is changed, a screen refresh
occurs, causing all fields to be updated for the newly selected interface. Shows only routing-enabled
interfaces and tunnels.
•
IPv6 Mode
— When IPv6 mode is enabled, interface is capable of IPv6 operation without a global
address. In this case, an EUI-64 based link-local address is used. This selector lists the two options for
IPv6 mode:
Enable
and
Disable
. Default value is
Disable
.