Filter
Top Products
Configuring Routing 563
• RIP Route Redistribution Configuration
• RIP Route Redistribution Summary
RIP Configuration
Use the RIP Configuration
page to enable and configure or disable RIP in Global mode. To display the
page, click Routing
→
RIP
→
Configuration in the tree view.
Figure 9-28. RIP Configuration
The RIP Configuration page contains the following fields:
•
RIP Admin Mode
— Select Enable or Disable from the drop-down menu. If you select Enable, RIP is
enabled for the switch. The default is Disable.
•
Split Horizon Mode
— Select None, Simple, or Poison Reverse from the drop-down menu. The
default is Simple. Split horizon is a technique for avoiding problems caused by including routes in
updates sent to the router from which the route was originally learned. The options are:
–
None
— No special processing for this case.
–
Simple
— A route is not included in updates sent to the router from which it was learned.
–
Poison Reverse
— A route is included in updates sent to the router from which it was learned, but
the metric is set to infinity.
•
Auto Summary Mode
— Select Enable or Disable from the drop-down menu. If you select Enable,
groups of adjacent routes are summarized into single entries, in order to reduce the total number of
entries. The default is Enable.
•
Host Routes Accept Mode
— Select Enable or Disable from the drop-down menu. If you select
Enable, the router accepts host routes. The default is Enable.