Filter
Top Products
Adding and Replacing Parts 97
2
Remove the center control cover:
a
Open the display all the way (180 degrees) so that it lies flat against your work surface.
b
Starting on the right side of the computer, use a plastic scribe to pry up the center control
cover. Lift it away from the computer, and lay it aside.
3
Remove the keyboard:
a
Remove the two M2.5 x 5-mm screws across the top of the keyboard.
NOTICE: The keycaps on the keyboard are fragile, easily dislodged, and time-consuming to replace. Be
careful when removing and handling the keyboard.
b
Rotate the keyboard up and slide it forward.
c
Hold the keyboard up and slightly forward to allow access to the keyboard connector.
center control cover
D7898bk2.book Page 97 Friday, April 29, 2005 9:39 AM