Filter
Top Products
134 Installing System Components
Figure 3-25. Replacing the System Battery
4
If installed, remove the expansion card from the expansion-card slot.
See "Removing an Expansion Card" on page 115.
5
If installed, remove the storage controller card. See "Removing the Storage
Controller Card" on page 119.
6
Remove the expansion-card riser. See "iDRAC6 Express Card (Optional)"
on page 122.
7
Locate the battery socket. See "Jumpers and Connectors" on page 181.
CAUTION: To avoid damage to the battery connector, you must firmly support the
connector while installing or removing a battery.
8
Support the battery connector by firmly holding the positive side of
the connector.
1 system battery 2 negative side of battery connector
3 positive side of battery connector
2
1
3
book.book Page 134 Tuesday, August 24, 2010 1:47 PM