Filter
Top Products
90 Installing System Components
4 With the lever on the hard drive carrier open, slide the hard drive into
the drive bay until the carrier contacts the backplane. See
Figure 3-8.
5 Close the handle to lock the drive in place.
Removing a Hard Drive From a Hard-Drive Carrier
Remove the screws from the slide rails on the hard-drive carrier and separate
the hard drive from the carrier. See Figure 3-9.
Figure 3-9. Installing a Hard Drive Into a Drive Carrier
1 hard drive 2 SAS/SATA indicator
3 drive carrier 4 screws (4)
2
1
3
4
book.book Page 90 Tuesday, August 24, 2010 1:47 PM