D-Link DES-3200-10 Switch User Manual


 
xStack
®
DES-3200-10/18/28/28F Layer 2 Ethernet Managed Switch User Manual
802.1X Settings
To configure the 802.1X Settings, click Security > 802.1X > 802.1X Settings:
Figure 5 - 19. 802.1X Settings window
This window allows you to set the following features:
Parameter Description
802.1X
Use the radio buttons to enable or disable 802.1X.
Auth Mode
Choose the 802.1X authentication mode, Port Based, or MAC Based.
Auth Protocol
Choose the authentication protocol, Local or RADIUS EAP.
From Port/To
Port
Enter the port or ports to be set.
QuietPeriod
(0-65535)
This allows you to set the number of seconds that the Switch remains in the quiet state following
a failed authentication exchange with the client. The default setting is 60 seconds.
SuppTimeout
(1-65535)
This value determines timeout conditions in the exchanges between the Authenticator and the
client. The default setting is 30 seconds.
ServerTimeout
(1-65535)
This value determines timeout conditions in the exchanges between the Authenticator and the
authentication server. The default setting is 30 seconds.
MaxReq (1-10)
The maximum number of times that the Switch will retransmit an EAP Request to the client
before it times out of the authentication sessions. The default setting is 2.
TxPeriod
This sets the TxPeriod of time for the authenticator PAE state machine. This value determines
127