D-Link DES-3200-10 Switch User Manual


 
xStack
®
DES-3200-10/18/28/28F Layer 2 Ethernet Managed Switch User Manual
SMTP Service
This window is used to test the SMTP Service Settings configured in the previous window.
To view the following window, click Configuration > SMTP Service:
Figure 2 - 29. SMTP Service window
To test to see if the SMTP settings are working properly, enter a Subject, Content, and then click the Send button.
MAC Notification Settings
MAC Notification is used to monitor MAC addresses learned and entered into the forwarding database. To globally set
MAC notification on the Switch, open the following window by opening the MAC Notification Settings in the
Configuration folder.
MAC Notification Global Settings
To configure the MAC Notification Global Settings for the Switch, click Configuration > MAC Notification Settings >
MAC Notification Global Settings
Figure 2 - 30. MAC Notification Global Settings window
The following parameters may be viewed and modified:
Parameter Description
State
Enable or disable MAC notification globally on the Switch.
Interval
(1-2147483647 sec)
The time in seconds between notifications.
History Size
(1-500)
The maximum number of entries listed in the history log used for notification. Up to 500
entries can be specified.
Click Apply to implement changes.
MAC Notification Port Settings
To configure the MAC Notification Port Settings for the Switch, click Configuration > MAC Notification Settings >
MAC Notification Port Settings:
36