D-Link DES-3200-10 Switch User Manual


 
xStack
®
DES-3200-10/18/28/28F Layer 2 Ethernet Managed Switch User Manual
Parameter Description
Group ID (1-16)
Select an ID number for the group, between 1 and 16.
Group Name
This is used to identify the new Protocol VLAN group. Type an alphanumeric string of up to 32
characters.
Protocol
This function maps packets to protocol-defined VLANs by examining the type octet within the
packet header to discover the type of protocol associated with it. Use the drop-down menu to
toggle between Ethernet II and IEEE802.3 SNAP.
Protocol Value
(0-FFFF)
Enter a value for the Group.
Click Add to make a new entry and Delete All to remove an entry.
802.1v Protocol VLAN Settings
The window allows the user to configure Protocol VLAN settings. The lower half of the window displays any previously
created settings.
To view this window, click L2 Features > 802.1v Protocol VLAN > 802.1v Protocol VLAN Settings:
Figure 3 - 14. 802.1v Protocol VLAN Settings window
The following fields can be set:
Parameter Description
Group ID
Click the corresponding radio button to select a previously configured Group ID from the drop-
down menu.
Group Name
Click the corresponding radio button to select a previously configured Group Name from the
drop-down menu.
VID (1-4094)
Click the radio button to enter the VID. This is the VLAN ID that, along with the VLAN Name,
identifies the VLAN the user wishes to create.
VLAN Name
Click the radio button to enter a VLAN Name. This is the VLAN Name that, along with the
VLAN ID, identifies the VLAN the user wishes to create.
802.1p Priority
This parameter is specified to re-write the 802.1p default priority previously set in the Switch,
which is used to determine the CoS queue to which packets are forwarded to. Once this field
is specified, packets accepted by the Switch that match this priority are forwarded to the CoS
queue specified previously by the user.
For more information on priority queues, CoS queues and mapping for 802.1p, see the QoS
section of this manual.
70