Filter
Top Products
xStack
®
DES-3200-10/18/28/28F Layer 2 Ethernet Managed Switch User Manual
Figure 6 - 29. Add CPU ACL Profile window for Ethernet example
Parameter Description
Select Profile ID
(1-3)
Use the drop-down menu to select a unique identifier number for this profile set. This value can
be set from 1 to 3.
Select ACL Type
Select profile based on Ethernet (MAC Address), IPv4 address, IPv6, or packet content mask.
This will change the menu according to the requirements for the type of profile.
Select Ethernet ACL to instruct the Switch to examine the layer 2 part of each packet header.
Select IPv4 ACL to instruct the Switch to examine the IPv4 address in each frame's header.
Select IPv6 ACL to instruct the Switch to examine the IPv6 address in each frame's header.
Select Packet Content ACL to specify a mask to hide the content of the packet header.
MAC Address
Tick either Source MAC Mask and enter a source MAC address mask for the source MAC
address or Destination MAC Mask and enter a destination MAC address mask for the destination
MAC address.
802.1Q VLAN
Ticking this option instructs the Switch to examine the VLAN identifier of each packet header and
use this as the full or partial criterion for forwarding.
802.1p
Ticking this option instructs the Switch to specify that the access profile will apply only to packets
with this 802.1p priority value.
Ethernet Type
Ticking this option instructs the Switch to examine the Ethernet type value in each frame's
header.
Click Apply to set this entry in the Switch’s memory.
The following CPU Access Profile List window opens:
169