D-Link DES-3200-10 Switch User Manual


 
xStack
®
DES-3200-10/18/28/28F Layer 2 Ethernet Managed Switch User Manual
Figure 6 - 35. CPU Access Rule Detail Information window for Ethernet example
To create an IPv4 ACL, click Add CPU ACL Profile in the CPU Access Profile List window. This will open the Add
CPU ACL Profile window. Use the drop-down menu to select a Profile ID between 1 and 3, click the IPv4 ACL radio
button, and then use the drop-down menu to select a protocol ICMP, IGMP, TCP, UDP, or Protocol ID. Click Select
and the following window will appear (this window will vary depending on whether ICMP, IGMP, TCP, UDP, or
Protocol ID has been selected):
Figure 6 - 36. Add CPU ACL Profile window for IPv4 example
Click on the boxes near the top of the window, which will then turn red and reveal parameters for configuration. To
create a new entry, enter the appropriate information and click Create. To return to the CPU Access Profile List
window, click <<Back.
The following parameters can be set for IPv4:
Parameter Description
VLAN
Selecting this option instructs the Switch to examine the VLAN part of each packet header
and use this as the, or part of the criterion for forwarding.
IPv4 DSCP
Selecting this option instructs the Switch to examine the DiffServ Code part of each packet
header and use this as the, or part of the criterion for forwarding.
172