D-Link DES-3200-10 Switch User Manual


 
xStack
®
DES-3200-10/18/28/28F Layer 2 Ethernet Managed Switch User Manual
Figure 3 - 30. IGMP Snooping Multicast VLAN Group List Settings window
Enter a Multicast Address and click Add. The new information will be displayed in the table at the bottom of the
window. Click Show IGMP Snooping Multicast VLAN Entries
to return to the IGMP Snooping Multicast VLAN
Settings window. Click Delete All to remove all the entries on this window.
IP Multicast Profile Settings
This window allows the user to add a profile to which multicast IP address reports are to be received on specified
ports on the Switch. This function will therefore limit the number of reports received and the number of multicast
groups configured on the Switch. The user may set an IP Multicast address or range of IP Multicast addresses to
accept reports (Permit) or deny reports (Deny) coming into the specified switch ports.
To view this window, click L2 Features > IGMP Snooping > IP Multicast Profile Settings:
Figure 3 - 31. IP Multicast Profile Settings window
The following fields can be set
Parameter Description
Profile ID
Use the drop-down menu to choose a Profile ID.
Profile Name
Enter a name for the IP Multicast Profile.
To edit and entry click the corresponding Edit button and to delete an entry click the corresponding Delete button.
Figure 3 - 32. IP Multicast Profile Settings (Edit) window
To configure the Group List Settings click the hyperlinked Group List
. The following window will appear:
82