D-Link DES-3200-10 Switch User Manual


 
xStack
®
DES-3200-10/18/28/28F Layer 2 Ethernet Managed Switch User Manual
To add or edit an entry, define the following parameters and then click Add/Modify:
Parameter Description
VLAN ID (1-4094)
The VLAN ID number of the VLAN on which the above Unicast MAC address resides.
MAC Address
The MAC address to which packets will be statically forwarded. This must be a unicast
MAC address.
Port
Select the port number on which the MAC address entered above resides.
VLAN Name
The VLAN Name associated with the subnet.
Click Apply to implement the changes made. The new entries will be displayed on the bottom half of the window.
Multicast Forwarding Settings
To view this window, click L2 Features > Forwarding & Filtering > Multicast Forwarding Settings:
Figure 3 - 48. Multicast Forwarding Settings window
The following parameters can be set:
Parameter Description
VLAN ID (1-4094)
The VLAN ID of the VLAN to which the corresponding MAC address belongs.
MAC Address
The MAC address that will be added to the multicast forwarding table.
Port Settings
Allows the selection of ports that will be members of the static multicast group. The options
are:
None - No restrictions on the port dynamically joining the multicast group. When None is
chosen, the port will not be a member of the static multicast group.
Egress - The port is a static member of the multicast group.
Click All to choose either all of the ports selected as None or all of the ports selected as
Egress. Click Clear All to clear all the settings at the top of this window.
Click Apply to implement the changes made. To delete an entry in the static multicast forwarding table, click the
corresponding Delete button. To modify an entry in the static multicast forwarding table, click the corresponding Edit
button and make the desired changes at the top of the window before clicking the Apply button.
98