D-Link DES-3200-10 Switch User Manual


 
xStack
®
DES-3200-10/18/28/28F Layer 2 Ethernet Managed Switch User Manual
must be set.
Priority (0-7)
Enter a priority value if you want to re-write the 802.1p default priority of a packet to the
value entered in the Priority field, which meets the criteria specified previously in this
command, before forwarding it on to the specified CoS queue. Otherwise, a packet will have
its incoming 802.1p user priority re-written to its original value before being forwarded by the
Switch.
Replace DSCP
Select this option to instruct the Switch to replace the DSCP value (in a packet that meets
the selected criteria) with the value entered in the adjacent field.
Time Range Name
Tick the check box and enter the name of the Time Range settings that has been previously
configured in the Time Range Settings window. This will set specific times when this
access rule will be implemented on the Switch.
Counter
Enable or disable the counter for this ACL rule.
Ports
Enter a range of ports to be configured.
Click Apply to display the following Access Rule List window:
Figure 6 - 26. Access Rule List window for Packet Content example
To view the configurations for a previously configured rule, click on the corresponding Show Details button, which will
display the following Access Rule Detail Information window:
Figure 6 - 27. Access Rule Detail Information window for Packet Content example
NOTE: Address Resolution Protocol (ARP) is the standard for finding a
host's hardware address (MAC Address). However, ARP is vulnerable as
it can be easily spoofed and utilized to attack a LAN. For a more detailed
explanation on how ARP works and how to employ D-Link’s advanced
unique Packet Content ACL to prevent ARP spoofing attack, please see
Appendix B, at the end of this manual.
167