Filter
Top Products
xStack
®
DES-3200-10/18/28/28F Layer 2 Ethernet Managed Switch User Manual
Guest VLAN
To view the following window, click, Security > 802.1X > Guest VLAN:
Figure 5 - 23. Guest VLAN window
The following fields may be modified to enable the 802.1X Guest VLAN:
Parameter Description
VLAN Name
Enter the pre-configured VLAN name to create as an 802.1X Guest VLAN.
Port List
Set the individual port(s) to be enabled for the 802.1X Guest VLAN or click All.
Click Apply to implement the 802.1X Guest VLAN. Once properly configured, the Guest VLAN Name and associated
ports will be listed in the lower part of the window.
NOTE: For more information and configuration examples for the 802.1X Guest VLAN
function, please refer to the Guest VLAN Configuration Example located on the D-Link
Website.
Initialize Port(s)
Existing 802.1X port and MAC-based settings are displayed and can be configured using the two windows below.
To initialize ports for the port side of 802.1X, the user must first enable 802.1X by port in the 802.1X Settings window.
To view the following window, click Security > 802.1X > Initialize Port(s):
Figure 5 - 24. Initialize Port(s) window for Port-based 802.1X
This window allows initialization of a port or group of ports. The Initialize Port Table in the bottom half of the window
displays the current status of the port(s). To initialize ports, choose the range of ports in the From Port and To Port
fields. To begin the initialization, click Apply.
To initialize ports for the MAC-based side of 802.1X, the user must first enable 802.1X by MAC address in the 802.1X
Settings window.
To view the following window, click Security > 802.1X > Initialize Port(s):
Figure 5 - 25. Initialize Port(s) window for MAC-based 802.1X
131