Filter
Top Products
MVME55006E Single-Board Computer Installation and Use (6806800A37D)
Functional Description Features
38
2.3 Features
The following table lists the features of the MVME5500.
Table 2-1 MVME5500 Features Summary
Feature Description
Processor – Single 1 GHz MPC7457 processor
– Bus clock frequency at 133 MHz
L3 Cache – 2MB using DDR SRAM
– Bus clock frequency at 200 MHz
Flash – 8MB Flash soldered on board
– 32MB expansion Flash soldered on board
System Memory – Two banks on board for 512MB using 256MB devices
– Expansion connector for a mezzanine board with two banks for
512MB using 256Mb devices
– Double-bit-error detect, single-bit-error correct across 72 bits
– Bus clock frequency at 133 MHz
Memory Controller – Provided by GT-64260B
– Supports one to four banks of SDRAM for up to 1GB per bank
Processor Host Bridge – Provided by GT-64260B
– Supports MPX mode or 60x mode
PCI Interfaces – Provided by GT-64260B
– Two independent 64-bit interfaces, one compliant to PCI spec rev
2.1 (Bus 0.0) and the other compliant to PCI spec rev 2.2 (Bus 1.0)
– Bus clock frequency at 66 MHz
– Provided by the HiNT PCI 6154 secondary interface
– One 64-bit interface, compliant to PCI spec rev 2.1 (Bus 0.1)
– Bus clock frequency at 33 MHz
Interrupt Controller – Provided by GT-64260B
– Interrupt sources internal to GT-64260B
– Up to 32 external interrupt inputs
– Up to seven interrupt outputs
Counters/Timers – Eight 32-bit counters/timers in GT-64260B
I2C – Provided by GT-64260B
– Master or slave capable
– On-board serial EEPROMs for VPD, SPD, GT-64260B init, and
user data storage
NVRAM – 32KB provided by MK48T37
Real Time Clock – Provided by MK48T37
Watchdog Timers – One in GT-64260B
– One in MK48T37
– Each watchdog timer can generate interrupt or reset, software
selectable
On-board Peripheral
Support
– One 10/100/1000BaseT Ethernet interface, one 10/100BaseT
Ethernet interface
– Dual 16C550 compatible UARTs