A
MVME55006E Single-Board Computer Installation and Use (6806800A37D)
97
A Specifications
A.1 Power Requirements
In its standard configuration, the MVME5500 requires +5V, +12V, and
–12V for operation. On-board converters supply the processor core voltage, +3.3V, +1.5V,
+1.8V, and +2.5V.
A.1.1 Supply Current Requirements
Table A-1 provides an estimate of the typical and maximum current required from each of the
input supply voltages.
In a 3-row chassis, PMC current should be limited to 19.8 watts (total of both PMC slots). In a
5-row chassis, PMC current should be limited to 46.2 watts (total of both PMC slots).
A.2 Environmental Specifications
Table A-2 lists the environmental specifications, along with the board dimensions.
Table A-1 Power Requirements
Model Power +5V ± 5%
MVME5500-0163 Typical: 6.7 A
Maximum: 8.0 A
MVME5500-0163 with memory mezzanine Typical: 7.5A
Maximum: 9.0 A
MVME5500-0163 with IPMC712/761 Typical: 7.60 A
Maximum: 9.2 A
Table A-2 MVME5500 Specifications
Characteristics Specifications
Operating Temperature 0° to +55° C (forced air cooling required)
400 LFM (linear feet per minute) of forced air cooling is
recommended for operation in the upper temperature range.
Storage Temperature –40° to 70° C
Relative Humidity Operating: 5% to 90% non-condensing
Non-operating: 5% to 95% non-condensing
Vibration Non-operating: 1 G sine sweep, 5–100 Hz,
horizontal and vertical (NEBS1)
Physical Dimensions 6U, 4HP wide (233 mm x 160 mm x 20 mm)