Filter
Top Products
Problem Solving
61
Scanning Problems
The file size is too big.
Adjust your scan settings. Try
selecting a lower resolution (dpi), or
scan only part of the image.
Your scanned image is faint or has
gaps.
■ Check the brightness setting.
Decrease the software or driver’s
brightness setting.
■ Try adjusting the Gamma
setting.
■ Check the condition of your
original. If the document is
damaged, dirty, or wrinkled,
these imperfections will show
up in your scan.
■ Check that the document is
placed flush against the
document table.
basics.book Page 61 Tuesday, October 24, 2000 9:53 AM