Filter
Top Products
1
Setting Up the Scanner
1-15
R4C345
Rev. C
A5 size CHAP1.FM
10/7/99 Pass 0
R
Proof Sign-off:
<tantoname> SEI K.Ito M.Fujimori
<leadername> M.Fujimori
<editorname> SEI G.Hildebrand
If you add the scanner to a system in which one of your SCSI
devices already has a SCSI ID of 2, change the scanner ID number
to an unused number using the rotary switch. See the table below
as a guide.
c
Caution:
The SCSI ID of each SCSI device should be unique.
Do not set the scanner’s SCSI ID to a number already in use by
another device on the daisy chain; otherwise the computer,
scanner, and other devices will not operate properly.
ID Availability Description
0 Not recommended Usually used for hard drive
1 Not recommended Usually used for hard drive
2 Factory setting of the scanner
3
4
5
6
7 May not be available Usually used for the SCSI board