Filter
Top Products
1
Setting Up the Scanner
1-17
R4C345
Rev. C
A5 size CHAP1.FM
10/7/99 Pass 0
R
Proof Sign-off:
<tantoname> SEI K.Ito M.Fujimori
<leadername> M.Fujimori
<editorname> SEI G.Hildebrand
The scanner is the last device in the daisy chain
The scanner is in the middle of the daisy chain
Connecting the scanner
Connect the scanner to your computer or to another SCSI device
as follows:
Note:
The combination of connectors on the SCSI cable you need varies
depending on the manufacturer of your SCSI device and SCSI interface
board.
1. Make sure the scanner, computer, and all other SCSI devices
are turned off and unplugged from the power source.
c
Caution:
Do not connect the scanner to the computer or other devices
while they are turned on as damage may occur.
Set the terminator switch to ON.
(other SCSI device)
terminator ON
Set the terminator switch to OFF.
terminator OFF
(other SCSI device)