Filter
Top Products
1-18
Setting Up the Scanner
R4C345
Rev. C
A5 size CHAP1.FM
10/7/99 Pass 0
L
Proof Sign-off:
<tantoname> SEI K.Ito M.Fujimori
<leadername> M.Fujimori
<editorname> SEI G.Hildebrand
2. Insert one end of the interface cable into the scanner SCSI
sockets and press until the locks on both sides snap in.
Note:
When connecting the scanner to a PC or any other SCSI device, the
total length of the cable must not exceed 3 meters.
3. Connect the other end of the cable to the SCSI port of your
computer or another SCSI device.
4. Plug in the power cords of your computer, scanner, and other
external SCSI devices.
Note:
Before turning on your system, be sure to first read the next section
of this guide, "Power-on sequence."
2-07.eps