Filter
Top Products
DXP DVI Pro and DXP HDMI Series • Reference Information 120120
Resolution range ............................ Up to 1080p (HDTV) or 1920x1200 (the highest resolution of the single-link DVI
standard) @ 60 Hz
Maximum data rate ........................ 6.75 Gbps (2.25 Gbps per color)
Maximum pixel clock ...................... 225 MHz
Standards ....................................... DVI 1.0, HDMI
Switching speed ............................. 200 ns, max.
Video input
Number/signal type ........................ 4 or 8 (depending on model) digital RGB (TMDS) HDMI (or single-link DVI-D*)
Connectors .................................... 4 or 8 female HDMI type A (digital only)
Nominal level
Digital video ............................ 1.2 Vp-p
DDC (Display Data Channel) .... 5.0 Vp-p (TTL)
Minimum/maximum level ............... 0.5 V to 1.0 Vp-p with no offset
Impedance ..................................... 100 ohms
Return loss ..................................... <-15 dB @ 1 MHz to 1.5 GHz
TDR rise time (10%-90%) .............. 75 ps
Equalization ................................... Automatic
Input cable length .......................... >100' (30 m) at 1920x1200 @ 48, 50, or 60 Hz; or 1080p; 8 bit color
NOTE: The transmission distance varies depending on the signal resolution and on the type of cable, graphic
card, and display used in the system.
Video output
Number/signal type ........................ 4 or 8 (depending on model) digital RGB
Connectors .................................... 4 or 8 female HDMI type A
Nominal level ................................. 1.2 Vp-p
Minimum/maximum level(s) ............ 0.5 V to 1.0 Vp-p with no offset (follows input)
Impedance ..................................... 100 ohms
Return loss ..................................... <-15 dB @ 1 MHz to 1.5 GHz
DC offset ....................................... ±500 mV maximum with input at 0 offset
Rise and fall time (20-80%) ............ 0.6 ns
Re-clocking .................................... Automatic
Peripheral device power ................. 250 mA per output
Control/remote — switcher
Serial control port ........................... (1) RS-232, 9-pin female D connector
(1) RS-232, front panel 2.5 mm mini stereo jack
Baud rate and protocol ................... 9600 to 115200 baud, 9600 baud (default), 8 data bits, 1 stop bit, no parity
Serial control pin configurations
9-pin D connector .................... 2 = Tx, 3 = Rx, 5 = GND
Mini stereo jack ....................... Tip = Tx, ring = Rx, sleeve = GND
Ethernet control port ...................... (1) RJ-45 female connector
Ethernet data rate .......................... 10/100Base-T, half/full duplex with autodetect
Ethernet protocol ........................... ARP, ICMP (ping), IP, TCP, DHCP, HTTP, Telnet
Default settings .............................. Link speed and duplex level = autodetected
IP address = 192.168.254.254
Subnet mask = 255.255.0.0
Gateway = 0.0.0.0
DHCP = off
Program control ............................. Extron control/conguration program for Windows
Extron Simple Instruction Set
(SIS)
Microsoft Internet Explorer ver. 6 or higher, Telnet