Filter
Top Products
DXP DVI Pro and DXP HDMI Series • SIS Configuration and Control 63
Command
ASCII Command
(Host to Switcher)
Response
(Switcher to Host)
Additional Description
Information Requests (continued)
Request part number
N
60-nnn[n]-01
]
DXP 44 DVI Pro = 60-875-01
DXP 48 DVI Pro =
60-1009-01
DXP 84 DVI Pro = 60-876-01
DXP 88 DVI Pro = 60-877-01
DXP 44 HDMI = 60-880-01
DXP 48 HDMI = 60-1010-01
DXP 84 HDMI = 60-881-01
DXP 88 HDMI = 60-882-01
Firmware Version Queries:
NOTE: There are up to three separate sets of Extron firmware on which the switcher can report: the controller firmware,
which is the overall control firmware; the Ethernet protocol firmware, which handles the Ethernet interface; and
the latest optional Extron firmware update, which is available at www.extron.com.
Query controller rmware
version
Q
X2!]
View rmware version
X2!
to
the second decimal place.
Example:
Q
1.23
]
The factory-installed controller
firmware version is 1.23.
Query controller rmware
version (verbose)
0Q
X2!
–
X2@
–
X2@]
Provide a detailed status of the
Ethernet protocol rmware,
the controller firmware, and
any firmware upgrade. The
firmware that is running is
marked by an asterisk (*). A
caret (^) indicates that the
firmware has a bad checksum
or an invalid load. ?.??
indicates that firmware is not
loaded.
Example:
0q
(See below.)
Ethernet
Protocol
Firmware
Response:
Description
DXP Firmware Version
Updated Firmware Version
* Indicates the Version Running
Upload Date and Time
3.03-1.13(1.81-DXP Series -Wed, 16 Jan 2003 00:00:00 GMT)-1.13*(1.81-DXP Series -Thu, 02 Sep 2011 18:42:05 GMT)
Request system status
S
X1^
•
X1^
•
X1&
•
X1*
•
X$]
Display voltages X1^, internal
temperature
X1&, fan speed
X1* (rpm), and power supply
status
X$.
Example:
S
3.29•4.85•+077.80•03750•1
Power supply
is on and Ok.
Fan 1 rotating
at 3750 RPM
5 V Power System
at 4.85 V
3.3 V Power
System at 3.29
Internal
Temperature
NOTE:
X$
= Power supply status 0 = not OK, 1 = OK
X1^
= Voltage Positive or negative voltage and magnitude
X1&
= Temperature
Degrees Fahrenheit
X1*
= Fan speed
In
RPM
X2!
= Firmware version number To second decimal place (n.nn)
X2@
= Verbose firmware version Version–description–upload date and time