Filter
Top Products
DXP DVI Pro and DXP HDMI Series • Matrix Software 81
Edit Administrator Password field as follows:
1. Click in the Administrator Password field. The graphic cursor becomes a text
cursor.
2. Make any desired changes to the case-sensitive password.
3. Press the <Tab> key on the keyboard or click in another field to exit the
Administrator Password field.
4. Click the Take button for the password change to take effect.
Setting the user password
The User Password field displays the password required to log on to the DXP switcher via
the Ethernet port as a user, without all administrator rights and privileges. Passwords are
case-sensitive and are limited to 12 uppercase and lowercase alphanumeric characters.
While you are logged on as a user, this eld is masked with asterisks (************) as a
security measure.
NOTES: • An administrator password must be created before a user password can be
created.
• The following characters are invalid or not recommended in passwords:
+ ~ , @ = ` [ ] { } < > ‘ ’ “ ” ; : | \ ? and {space}.
Edit this eld as follows:
1. Click in the
User Password field. The graphic cursor becomes a text cursor.
2. Make any desired changes to the case-sensitive user password.
3. Press the <Tab> key on the keyboard or click in another field to exit the User
Password field.
4. Click the Take button for the password change to take effect.
Setting the mail server IP address
The Mail Server IP Address field displays the IP address of the mail server that handles
the e-mail for the facility in which the DXP switcher is installed (see “Setting the IP
address” on page 78 for the valid address format).
Edit this eld as follows:
1. Click in the Mail Server IP Address field. The graphic cursor becomes a text cursor.
2. Make any desired changes to the mail server IP address.
3. Press the <Tab> key on the keyboard or click in another field to exit the mail server IP
address field.
4. Click the Take button for the address change to take effect.
Setting the mail server domain name
The Mail Server Domain Name field displays the domain name that the DXP switcher uses
to log on to the e-mail server. Standard domain conventions (such as xxxxx@xxx.com)
apply.
NOTE: The following characters are invalid or not recommended in a domain name:
+ ~ , @ = ` [ ] { } < > ‘ ’ “ ” ; : | \ ? and {space}. The @
character is acceptable only as the lead-in to the domain name (such as
@folklore.net).