Filter
Top Products
DXP DVI Pro and DXP HDMI Series • Matrix Software 77
IP Setup
The IP Settings/Options window lets you view and, if connected via the RS-232 or RS-422
link or logged on via the Ethernet port as an administrator, edit settings unique to the
Ethernet interface. To display the IP Settings/Options window, select IP Options from the
Tools pull-down menu.
Figure 78. IP Settings/Options Window
CAUTION: Editing the following fields on the IP Settings/Options screen while
connected via the Ethernet port can immediately disconnect your
computer from the switcher:
• IP Address
• Gateway IP Address
• Subnet Mask
• Use DHCP
• Administrator Password
NOTES: • Extron recommends editing the settings on this screen using the RS-232 or
RS-422 link and protecting the Ethernet access to this screen by assigning an
administrator password to qualified and knowledgeable personnel only.
• When the control program is connected to the DXP via RS-232 or RS-422,
the Administrator Password and User Password fields are not masked.
If a password has been inadvertently changed to an unknown value, you can
look up and, if desired, change a password in this window without knowing
the current password.
See “IP Addressing” on page 127 for basic information about IP addresses.