DXP DVI Pro and DXP HDMI Series • SIS Configuration and Control 56
Command
ASCII Command
(Host to Switcher)
Response
(Switcher to Host)
Additional Description
Mute Commands (continued)
Audio mute
X#
*1Z Amt
X#
*1
]
Mute audio for Output
X#
(audio off).
Audio unmute
X#
*0Z Amt
X#
*0
]
Unmute audio for Output
X#
(audio on).
View individual audio mute
X#
Z
X$]
View audio mute status
X$
for
Output
X#
.
Global audio mute
1*Z
Amt1
]
Mute audio for all outputs.
Global audio unmute
0*Z
Amt0
]
Unmute all audio outputs.
View all audio and video
mutes
E
VM
X(]
View audio and video mute
status
X(
for all outputs. Each
X(
response is the mute status
of an output, starting from
Output 1.
Example:
DXP DVI Pro 88
E
VM
}
Mut01002300
]
Output 2 video, Output 5
audio, and Output 6 video
and audio are muted. All other
outputs are unmuted.
NOTE: The “Mut” portion of the response appears only when the switcher is in verbose mode 2 or 3 (see the Set
verbose mode command on page 69).
Save, Recall, and Directly Write Global and Room Presets
NOTES: • If you try to recall a preset that is not saved, the matrix switcher responds with the error code E11.
• If the room is nonexistent, the matrix switcher responds with the error code E21.
• The following characters are invalid or not recommended in preset names:
+ – , ` @ = [ ] { } ‘ ’ “ ” ; : | \ and ?
Save current configuration as
a global preset
X&
,
Spr
X&]
Save the current configuration
as preset
X&
. The command
character is a comma.
Example:
9
,
Spr09
]
Save current ties as preset 9.
Recall a global preset
X&
.
Rpr
X&]
Recall global preset
X&
. The
command character is a
period.
Example:
5
.
Rpr05
]
Recall preset 5, which
becomes the current
configuration.
Save current configuration as
a room preset
X^
*
X*
,
Rmm
X^
•Spr
X*]
Save the current configuration
as preset
X*
for room
X^
.
The command character is a
comma.
Example:
3*9
,
Rmm03•Spr09
]
Save current ties as preset 9
for room 3.
NOTE:
X#
= Output number 1 – maximum number of outputs for your model
X$
= Mute status for individual output 0 = unmuted, 1 = muted
X^
= Room number (for room presets) Each room can have up to 10 presets (
X*
) assigned.
X&
= Global preset number 00 – 32. 00 = current configuration
X*
= Room preset number 00 – current ties for the room in view mode, 10 maximum
X(
= Audio and video mute status for For each output:
all outputs (VM command) 0 = no mutes, 1 = video mute, 2 = audio mute, 3 = video and audio
mute