Filter
Top Products
DXP DVI Pro and DXP HDMI Series • SIS Configuration and Control 66
IP-specific SIS Commands
Symbol Definitions for IP-specific Commands
X3)
= Matrix name Up to 24 alphanumeric characters, including hyphens
NOTE: The following characters are invalid or not recommended in the name:
{space} ~ , @ = ` [] {} < > ‘ ’ “ ” ; : | \ and ?
X3!
= Default name Factory default name (model name + last three pairs
of the MAC address)
X3@
= Time and date (for set) In the format MM/DD/YY•HH:MM:SS, where:
MM = month: 01 (January) through 12 (December)
DD = 01 through 31
YY = 00 through 99
HH = 00 through 23
MM = 00 through 59
SS = 00 through 59
X3#
= Time and date (for read) In the format Day,•DD•Mmm•YYYY•HH:MM:SS:
Day = weekday: Mon through Sun
DD = 01 through 31
Mmm = month: Jan through Dec
YYYY = 2000 through 2099
HH = 00 through 23
MM = 00 through 59
SS = 00 through 59
X3$
= GMT offset –12.0 through +14.0. Hours and minutes removed
from GMT
X3%
= Daylight Saving Time 0 = Daylight Saving Time off or ignore
1 = Daylight Saving Time on (northern hemisphere)
2 = Daylight Saving Time on (Europe)
3 = Daylight Saving Time on (Brazil)
X3^
= IP address nnn.nnn.nnn.nnn
X3&
= Hardware (MAC) address nn-nn-nn-nn-nn-nn
X3*
= Number of open connections 0 through 255
X3(
= Password 12 alphanumeric characters
NOTE: The following characters are invalid or not recommended in passwords:
{space} + ~ , @ = ` [ ] { } < > ‘’ “ ” ; : | \ and ?.
X4)
= E-mail domain name Standard domain name rules apply
(for example: nnnnn@xxx.com)
NOTES:
•
The following characters are invalid or not recommended in a domain name:
{space} + ~ , = ` [] {} < > ‘ ’ “ ” ; : | \ and ?.
• The @ character is acceptable only as the lead-in to the domain name (such as
@extron.com).
X4!
= E-mail account 65 through 72
65 = recipient 1, 66 = recipient 2, ...,
72 = recipient 8
X4@
= E-mail recipient address Typical e-mail address format (nnnn@xxx.com)
X4#
= Notification selections, part 1 I = inputs
F = fans
P = power supply
X4$
= Notification selections, part 2 If
X4#
= I, then:
X4$
= 0 (all inputs) or 1 through 8
(input 1 through input 8)
If
X4#
= F, then:
X4$
= 00 (all fans)
If
X4#
= P, then:
X4$
= 00 (both power supplies)