Filter
Top Products
DXP DVI Pro and DXP HDMI Series • Operation 33
2. Press and hold the Preset button until it blinks (approximately 2 seconds).
Press and hold the Preset button until it blinks.
2 seconds
All input buttons with assigned
presets light.
If you then save the configuration
to a lit preset number, the
configuration data at that preset
location will be overwritten.
Preset Assigned
INPUTS
1
2
3
4
5
6
7
8
No Preset Assigned
PRESET PRESET
Figure 46. Enter Save Preset Mode
3. Press and release the input or output button for the desired preset.
C O N T R O L
ESCVIEW
•
•
The Enter button blinks
to indicate the need to
save the preset.
The Preset button
continues to blink.
PRESET
ENTER
Press and release the Input 1 button.
The button blinks to indicate that this
preset number is selected but not saved.
INPUTS
1
2
3
4
5
6
7
8
Figure 47. Select the Preset
4. Press and release the Enter button. The current conguration is now stored in the
selected memory location.
C O N T R O L
PRESET
ENTER
ESCVIEW
The Enter and Preset
buttons return to unlit or
background illumination.
Press the Enter button to
save the preset.
All input buttons return to unlit
or background illumination.
Figure 48. Press the Enter Button
Example 7: Recalling a Preset
In the following example, a preset is recalled to become the current configuration. The
steps show the front panel indications that result from your action.
1. Press and release the Esc button.
C O N T R O L
PRESET
ENTER
ESCVIEW
Press the Esc button to clear all selections.
The button flashes once.
Figure 49. Clear All Selections