Filter
Top Products
DXP DVI Pro and DXP HDMI Series • Operation 31
5. Press and release the Preset button to select group 2.
C O N T R O L
PRESET
ENTER
ESCVIEW
1324
Press and release the Preset button to select group 2.
The button lights to indicate the selection.
Group #
Figure 41. Select I/O Group 2
6. Press and release the desired input and output buttons.
Press and release the Input 5 through Input 8 buttons.
The selected buttons light.
Press and release the Output 5 through Output 8 buttons.
The selected buttons light.
1 2 3 4
OUTPUTS
1 2 3 4
INPUTS
5678
5678
Figure 42. Assign Inputs and Outputs to Group 2
7. Simultaneously press and release the Video and Audio buttons to exit I/O group mode.
I / O
VIDEO AUDIO
Press and release both buttons.
Figure 43. Deselect I/O Group Mode
NOTE: If you do not press any front panel buttons for approximately 30 seconds,
the front panel times out and the switcher exits I/O group mode.
• Group 1 consists of inputs and outputs 1 through 4.
• Group 2 consists of inputs and outputs 5 through 8.