Filter
Top Products
DXP DVI Pro and DXP HDMI Series • Operation 16
g
Esc
>
button — The Esc
>
button does the following:
Primary functions (❏):
❏ Cancels operations or selections in progress and resets the front panel button
indicators.
NOTE: The Esc
>
button does not reset the current configuration or any
presets.
❏ Indicates that the escape function has been activated (flashes once).
Secondary functions (
•
):
• In I/O grouping mode, selects group 4 (see “I/O Grouping” on page 28).
• In I/O grouping mode, indicates that group 4 is selected.
• With the Enter, Preset, and View
<
buttons, selects serial port configuration mode
(see “Selecting the RS-232/RS-422 Protocol and Baud Rate (Rear Panel)” on
page 42).
• Selects 115200 baud for the Remote RS232/RS422 and the RS-232 Config ports
in serial port configuration mode.
• Indicates that the Remote RS232/RS422 and the RS-232 Config ports are set to
115200 baud in serial port configuration mode.
I/O Buttons
You must select video, audio, or both before creating or viewing a tie or a
conguration. This is done by pressing the Video button (
g
) or the Audio button (
h
).
Primary Functions
VIDEO AUDIO
Action/indication:
Select or deselect video.
Green when selected
(DXP DVI Pro and HDMI
models only) Select or
deselect audio.
Red when selected
Secondary Functions
Front panel locks
Action 1: With Enter, select lock mode 2 or toggle between
mode 0 and mode 2.
Action 2: Select lock mode 1 or toggle between lock modes
1 and 2.
Resets Action: Perform a system reset.
Port
configuration
Action/
indication:
Select RS-232.
Blink: Selected
Select RS-422.
Blink: Selected
h Video button — The Video button does the following:
Primary function (❏):
❏ Selects and deselects video for a configuration that is being created or viewed,
and lights green to indicate that video is available for configuring or for viewing.