Extron electronic MLS 608 D Switch User Manual


  Open as PDF
of 100
 
Command ASCII Command
(host to switcher)
Response
(switcher to host)
Additional
Description
Output Bass Adjustment (Group Master 3)
Set gain (dB)
ED3*X2)GRPM}
GrpmD03*X2)]
Set the gain value X2)
for group master 3.
Example: ED3*240GRPM} GrpmD03*+00240]
Sets the gain value to
+24 dB.
Example: ED3*0GRPM} GrpmD03*+00000]
Sets the gain value to
0 dB.
Example: ED3*-100GRPM} GrpmD03*-00100]
Sets the gain value to
-10 dB.
Increment gain
ED3*X&+GRPM}
GrpmD03*X2)]
Increase the gain value
X2) by X&.
Decrement gain
ED3*X&-GRPM}
GrpmD03*X2)]
Decrease the gain value
X2) by X&.
View master value
ED3GRPM}
X2)]
View master bass output
value X2).
Output Treble Adjustment (Group Master 4)
Set gain (dB)
ED4*X2)GRPM}
GrpmD04*X2)]
Set the gain value X2)
for group master 4.
Example: ED4*240GRPM} GrpmD04*+00240]
Sets the gain value to
+24 dB.
Example: ED4*0GRPM} GrpmD04*+00000]
Sets the gain value to
0 dB.
Example: ED4*-100GRPM} GrpmD04*-00100]
Sets the gain value to
-10 dB.
Increment gain
ED4*X&+GRPM}
GrpmD04*X2)]
Increase the gain value
X2) by X&.
Decrement gain
ED4*X&-GRPM}
GrpmD04*X2)]
Decrease the gain value
X2) by X&.
View master value
ED4GRPM}
X2)]
View master treble
output value X2).
Overall Output Volume Mute Setting (Group Master 5)
NOTE: This command mutes the program and mic audio. It does not mute the embedded audio on the HDMI output signal.
Set volume mute
ED5*X4(GRPM}
GrpmD05*X4(]
Set the volume mute X4(
for group master 5.
View master value
ED5GRPM}
X5)]
View master volume
mute value X5).
Audio Input Format
NOTE: For audio inputs 5-8.
Selects between analog (5-pole captive screw) or digital (embedded in HDMI input).
Set format
EDX1)*X1!AU} DsDX1)*X1!]
Sets audio input X1) to
format X1!.
View format
EDX1)AU}
X1!]
View audio format X1!
for input X1).
NOTE: X& = Increment and decrement dB values: in 0.1 dB steps (multiply by 10, for example 10 = 1.0 dB).
X1) = Inputs 5-8: 5 = 30008, 6 = 30010, 7 = 30012, 8 = 30014
X1! = Audio format: 0 = analog, 1 = digital (default setting)
X2) = Output bass/treble master value: 240 to -240, default 0, decibel value multiplied by 10.
For example 230 = +23 dB, -210 = -21 dB.
X4( = Mute status: 0 = mute off, 1 = mute on (default)
X5) = Mute value: +00000 = off, +00001 = on (default)
MLS 608 D Series • SIS Programming and Control 71
 previous next