Filter
Top Products
5. Save the translucent, white diffuser, but remove the text/label insert from the
transparent button cap lens.
6. Insert the replacement button label into the button cap. Check for correct label
orientation.
7. Align the white diffuser plate with the cap (lens). The bumps on the diffuser plate
should be aligned (top and bottom) with the notches on the clear button cap. Firmly
snap it into place.
8. Align the tabs on the plunger with the notches on the diffuser plate. Gently, but
firmly, press the reassembled button into place in the switcher front panel.
9. Repeat steps 2 to 8 as needed to relabel other buttons.
Blank Button Labels
MLS 608 D Series • Button Labels 83