Filter
Top Products
Command ASCII Command
(host to switcher)
Response
(switcher to host)
Additional
Description
RGB Delay Time
NOTE: RGB delay affects only inputs 1-3 and if they are congured to RGB format.
Set RGB delay
EX$D} DlyX$]
Set RGB delay to (X$ x
0.5) seconds.
View setting
ED}
X$]
View RGB delay setting.
MTP Output Pre-peaking
Set output
pre-peak on
E1Opek} Opek1]
Turn output pre-peak on.
Set output
pre-peak off
E0Opek} Opek0]
Turn output pre-peak off
(default).
View status
EOpek} 1] or 0]
View pre-peaking status.
MTP Input Signal Level Adjustment
Specify a value
EX1(ILVL} IlvlX1(]
Specify an input signal
level value X1(.
Increment value
E+ILVL} IlvlX1(]
Increase the signal level
value by 1.
Decrement value
E-ILVL} IlvlX1(]
Decrease the signal level
value by 1.
View current value
EILVL}
X1(]
View current level X1(.
MTP Input Signal Peaking Adjustment
Specify a value
EX1^IPEK} IpekX1^]
Specify an input peaking
value X1^.
Increment value
E+IPEK} IpekX1^]
Increase value by 1.
Decrement value
E-IPEK} IpekX1^]
Decrease value by 1.
View current value
EIPEK}
X1^]
View current X1^.
NOTE: X$ = RGB delay for inputs 1-3: maximum delay is 5 seconds, in 0.5 second intervals, default = 0 seconds
X1^ = Input signal peaking adjustment range: 0 to 255 (default = 0)
X1( = Input signal level adjustment range: 0 to 255 (default = 60)
MLS 608 D Series • SIS Programming and Control 72