Filter
Top Products
RESTRICTED USE ONLY FARGO Electronics, Inc.
Using your Card Printer
Connecting the Printer to your Computer
Your card printer is designed to be used with nearly any IBM-PC or compatible running
Windows 3.1x, Windows 95/98, or Windows NT. A minimum of a 486 DX class computer
with 8MB RAM or higher is required. For best performance, a Pentium-class computer with
32 MB RAM or higher is recommended.
The printer is equipped with an ECP-compatible, high-speed Centronics parallel port. This
port is the means through which the printer receives data from your computer. To connect
the printer to your computer, obtain a shielded, bi-directional parallel cable and refer to the
following steps:
Step Procedure
1 Connect the Centronics-type parallel side to the printer.
Snap the fastening clips into place. (Note: The extra port shown in the previous
illustration is an Auxiliary Port (subminiature-D connector) included and used only
on units equipped with an optional smart card contact station.)
If your unit is equipped with a contact station and you have questions regarding its
use, please contact your authorized reseller.
Persona® C25 Card Printer User Guide (Rev. 4.0)
146