Filter
Top Products
2-1
CHAPTER 2 MODEL CONFIGURATION AND
EQUIPMENT STRUCTURE
This chapter gives the model configuration and equipment structure.
2.1 Model Configuration
The printer model differs with two specifications: print line and power supply.
DL9300/9400
Basic specification
Print line at 10 cpi: 80 columns (DL9300)
136 columns (DL9400)
Alternative specification
Power supply: 100-120 VAC or 220-240 VAC input
Add-on installable at factory
Front cover (transparent type)
Add-ons installable by user
Cut-sheet feeder
Tractor unit
cpi: characters per inch
Notes:
The following three emulations are standard for all versions.
• DPL24C PLUS: Fujitsu proprietary command set for DL-series serial printers
• IBM Proprinter XL24E
• Epson ESC/P2
The following two interfaces are standard and automatically switched for all versions (dual interface).
• Centronics parallel
• RS-232C serial
The printer is shipped with the standard tractor unit installed at the front of the printer.
This manual covers all models. An understanding of equipment structure helps relate the information in this
chapter to a particular model.