Filter
Top Products
3-16
Bar pasting
Metal staple
Rear stacker position for continuous forms
Notes:
1. To prevent paper jams, avoid the following:
• Bar-pasting that makes forms stiff.
• Metal staples that cause forms to catch in the paper feed path. The print head may also be damaged in
printing on staples.
2. The raised fold of the top part at the perforation (fold) must be 1 mm (0.04 in) or less, with the bottom layer
flat as shown below.
3. When using continuous forms, the rear stacker must be down as shown below.
1 mm (0.04 in.) or less
Bottom layer flat
Example: 3-part