Fujitsu 9400 Printer User Manual


 
2-8
(4) AC inlet and CSF connector (rear CSF)
The AC inlet consists of the power input connector, the wiring cable, and the bracket on which the connector
for the rear CSF is mounted.
(5) CSF connector (front CSF)
The connector board for the front CSF is mounted at the front right of the bottom cover.
2.3.4 Options and consumables
(1) Cut-sheet feeders
A cut-sheet feeder allows both single-part cut sheets and multi-part cut sheets to be fed automatically.
The SF930 single-bin feeder is available for DL9300, and the SF940 single-bin feeder for DL9400.
(2) Tractor unit
An additional tractor unit can be installed in the printer. Because the standard tractor unit is installed at the
front of the printer at shipment, the additional tractor is installed at the rear of the printer. However, both
tractor units are the same, and installable at either position.
(3) Front cover (transparent type)
This type of front cover has the transparent window so that printed characters are visible without opening the
cover.
(4) Ribbon cartridge
The black ribbon cartridge contains a continuous inked ribbon and is installed on the print head carriage.
(5) Print head
The 24-wire print head is easily installed on and removed from the print head carriage.