Filter
Top Products
5-16
5.4.2 DPL24C PLUS command set
This section lists command codes used for Fujitsu DL series printers.
1.
Function
Print mode control
Double-strike (bold) printing on
Double-strike (bold) printing off
Emphasized (shadow) printing on
Emphasized (shadow) printing off
Italic printing on
Italic printing off
Select character style and screenin
n1 = 0: Normal
1: Outlined
2: Shaded
3: Outlined and shaded
4: Thin outlined
5: Thin shaded
6: Thin outline and shaded
n2 = 0: Transparent
1: Light dot matrix
2: Heavy dot matrix
3: Vertical bars
4: Horizontal bars
5: Slants
6: Back slants
7: Lattice
One-line double-width characters on
One-line double-width characters off
Double-width characters on/off
(on: n = 1, off: n = 0)
Double-height characters on/off
(on: n = 1, off: n = 0)
This command does not adjust line spacing.
Multiple width and height printing
n = 0: Not adjusted
1: Character pitch multiplied
2: Line spacing multiplied
3: Character pitch and line spacing multiplied
h1: Tens digit of horizontal multiple
h2: Units digit of horizontal multiple
v1: Tens digit of vertical multiple
v2: Units digit of vertical multiple
(0 < h1 h2 or v1 v2 < 16)
Condensed characters on
Condensed characters off
Command
ESC G
ESC H
ESC E
ESC F
ESC 4
ESC 5
ESC e S (n1) (n2)
SO or ESC SO
DC4
ESC W (n)
ESC V (n)
ESC u (n) (h1) (h2) (v1) (v2)
SI or ESC SI
DC2