Filter
Top Products
3-13
3.7.2 Printing areas
Figures 3.1 and 3.2 detail valid printing areas.
Continuous forms:
DL9300: 102-267 mm (4-10.5 in.)
DL9400: 102-420 mm (4-16.5 in.)
4.73 mm (0.19 in.)
Paper end
Perforation
4.73 mm (0.19 in.)
4.73 mm (0.19 in.)
Approx. 102 mm (4 in.) for front-tractor feed.
Approx. 93.6 mm (3.7 in.) for rear-tractor feed.
5.08 mm or more
(0.2 in. or more)
5.08-38 mm
(0.2-1.5 in.)
Print area may be off the paper, depending on
paper setting or width.
May be decreased to 4.23 mm (1/6 in.).
Ηowever, line spacing may be uneven.
Min. 102 mm
(4 in.)
Print area
Print area
Figure 3.1 Printing area for continuous forms